퓨즈는 30A 입니다. 퓨즈에 씌워진 투명 수축튜브는 가열하지 않았습니다. 퓨즈도 뺄 수 있습니다. 뒷배선을 끼우기 위해서.... 그리고 본품에는 타미야 커넥터도 플라스틱은 끼워져 있지 않습니다.(장착성을 위해) 하지만, 핀은 저희가 끼워서 보냅니다.(편리성을 위해서) 타미야 커넥터 정면을 보시면 동그라미쪽이 + 이며, 정사각형이 - 입니다.

딘스커넥터는 동봉을 해드렸습니다. 혹시나 몰라서요^^ (주의 : + - 를 꼭 확인해야합니다. 한 번이라도 잘 못 꼿으면 데미지를 받습니다)

사진처럼 Lonex와 VFC는 사이즈를 수정해주셔야합니다. 줄 등으로 가공해야합니다. 원래 취지는 셀렉터가 단발일 때 단발/ 연발일 때 연발을 맞추기 위함입니다. 단연발 스위치를 위해서 약간 모따기 한 흔적도 보이시죠?

위 부품은 레비아탄 회로 사용시 제거 합니다.

모터가 아래로 들어갔다 나왔다하면서 Signal 선을 손상시키지 않기 위해서 가장 얇은 신호선을 아래로 배치했습니다.

신호선과 +선을 합쳐야 합니다. 어떤 구간에서 하셔도 상관은 없습니다.

신호선과 +선을 합친 후 수축튜브 등을 사용해 주시면 좋습니다.

Product description: Leviathan - V2 to stock

Leviathan - V2 is processor controlled mosfet with Bluetooth communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics...
Everything is controlled via application in the smart phone (iOS and Android).
Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts.
Comes with completely made wires to stock with 30A mini fuse and deanT connector - no soldering needed.

MAIN FUNCTIONS:
- Adds new shooting modes independent for every position on the fire selector (SAFE - SEMI - AUTO)
- Three adjustable bursts (range 2 - 20 shots)
- Rate of fire makes breaks between shots to reduce RoF. It gives fast trigger response even with very low rate of fire, just like in a real gun
- Adjustable strength active braking (can be disabled)
- Pre-cocking function for instant shot on SEMI fire
- Delay between shots adds time in which isn't possible to shoot, it simulates the delay from gun reload or recoil (range 0,1 - 4,0 seconds)
- Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
- User can save multiple settings under profiles
- Update function fixes bugs and adds new features to the device
- Application shows actual battery voltage value. Color lines indicates battery charge status
- There are three shot counters. Total count every shot during the device lifetime. User counter can be reset by user anytime. Power-up counter is reset by battery connection
- Error log shows errors made during the device life
- Leviathan - V2 monitors current, voltage and temperature to avoid any damage when something go wrong.
- Motor vibrates and beeps as a feedback for user
- Programmed settings are saved in the Leviathan - V2 memory immediately after their change, so settings aren't lost when is Bluetooth or battery disconnected

FIRE MODES:
Independent for every position on the fire selector (SAFE - SEMI - AUTO)
- SAFE: no responding on the trigger pull.
- Semi: it fires single shot per trigger pull.
- Semi/BurstX: short trigger pull fires single shot, long trigger pull fires burst.
- Double trigger: it fires single shot when trigger is pulled and another single shot when is released.
- BurstX: gun shoot burst per trigger pull.
- BurstX/BurstY: short trigger press fires burstX, long trigger press makes burstX+burstY fire.
- BurstX/Full: short trigger press fires burstX, long trigger press makes auto fire.
- Full: gun makes auto fire until releasing trigger.

TECHNICAL SPECIFICATIONS:
- Easy installation inside the gearbox version 2, compatible with Tokyo Marui standard
- In the most cases is no modifications needed in the gun or Leviathan - V2
- It uses micro switch actuated by sector gear for perfect semi and burst fire timing
- CNC trigger included with package has screw to move its zero position. Thanks to it, shot can be made by very short trigger pull, it is called "hair trigger" modification
- Thanks to advanced electronics, Leviathan - V2 can be used with any common gearbox upgrade and gun rate of fire
- Completely made wiring allows the fastest and the easiest installation into the gun, it is long enough for all kind of weapons with battery placed in the stock. No soldering is needed
- There are high quality power wires 1,5 qmm (AWG16) with thin and hard MPPE insulation and signal blue wire 0.34 qmm (AWG24) with MPPE insulation
- Power wires outer diameter is only 2,06 mm and blue wire 1,24 mm
- The wire length between the gearbox and the battery connector is 290mm
- Electronics are coated with lacquer, it protects Leviathan - V2 against water
- For right pre-cocking function is necessary to have in the gearbox functional antireverse latch
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- Device increases gun rate of fire and battery holds longer, than with basic wiring
- With active braking ON piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF)
- In weapons with very high rate of fire (ROF) active brake solves multiple shots in semi mode
- The braking effect is the most powerful with high torque motor
- Remove from the gearbox: cut off lever, trigger, trigger contacts and trigger block, you will not need them with the Leviathan - V2

MOBILE APPLICATION: you can install it here
DEVICE INSTRUCTIONS: you can download installation manual in English here [PDF, 4.33 MB]
PACKING:
- Leviathan - V2 drop-in module with wiring to stock, DeanT connector, 30A mini fuse and faston connectors to the motor
- CNC black trigger with zero path adjustment screw
- Screw with washer for securing device in the gearbox
- Foam to keep device in place
- Installation manual in English

SAFETY WARNING:
- Installation of this device into the gearbox requires advanced technician skills!
- Please read these informations before installing your device to prevent any damage.
- Short circuit or incorrectly connected battery will cause immediate damage to the device which is not covered by the warranty. It can lead to fire or even battery explosion.
- Disconnect battery, when you aren't using the gun! Otherwise you will fully discharge the battery. Because the device drains small amount of current from the bettery all the time.
- Don't connect battery when gun pointing towards you, another person or an animal.
- Don't modify, repair and put into any kind of liquids or thermal shock the Leviathan - V2.